Introducing the All-in-One Unit Conversion Calculator: A Comprehensive Tool for Engineers

The All-in-One Unit conversion Calculator is a versatile and powerful tool designed specifically for engineers. It provides a wide range of unit conversion calculators for various quantities commonly encountered in engineering disciplines. With a user-friendly interface and precise calculations, this calculator aims to streamline the conversion process and enhance productivity in engineering tasks.

This comprehensive calculator includes conversion tools for multiple quantities, allowing engineers to effortlessly switch between units of measurement. This Unit Conversion Calculator covers SI unit system, Metric unit system as well as Imperial unit system.

Here’s a breakdown of the supported quantities and their respective units:

Length Unit Conversion:

Units: in, ft, yd, mi, NM, m, mm, km

1 mile =
63.36000E6	mil (0.001 inch)
63,360.00	in (inch)
5,280.000	ft (foot)
1,760.000	yd (yard)
1.000000	mi (mile)
0.8689762	NM (nautical mile)
1.609344E+6	mm (millimeter)
160,934.4	cm (centimeter)
1,609.344	m (meter)
1.609344	km (kilometer)

Area Unit Conversion:

Units: in², ft², mi², acre, m², cm², mm²

1 m2 =
1,550.003	in² (inch²)
10.76391	ft² (foot²)
1.195990	yd² (yard²)
386.1022E-9	mi² (mile²)
0.0002471054	acre
1,000,000.0	mm² (millimeter²)
10,000.000	cm² (centimeter²)
1.0000000	m² (meter²)
1.0000000E-6	km² (kilometer²)
0.0001000000	hectare

Volume unit Conversion:

Units: m³, L, in³, ft³, ft³/min, gpm

1 m3 =
61,023.74	in³ (inch³)
35.31467	ft³ (foot³)
1.307951	yd³ (yard³)
239.9128E-12	mi³ (mile³)
2,113.376	pint
1,056.688	quart
264.1720	gal (gallon)
1000.0000E6	mm³ (millimeter³)
1,000,000.0	cm³ (centimeter³) (CC)
1.0000000	m³ (meter³)
1.0000000E-9	km³ (kilometer³)
1,000,000.0	mL (milliliter)
1,000.0000	L (liter)

Mass Unit Conversion:

Units: g, kg, lbm, oz, tonne

1 kg =
2.204623	lbm (pound-mass)
0.06852177	slug
0.001102311	ton (short ton)
0.0009842065	ton (long ton)
1,000.000	gm (gram)
1.000000	kg (kilogram)
0.001000000	tonne (metric ton)

Force Unit Conversion:

Units: N, lbf, dyn, kgf

1 N =
0.2248089	lbf (pound-force)
0.0002248089	kip (1000 lbf)
1.000000	N (Newton)
101.9716	gf (gram-force)
0.1019716	kgf (kilogram-force)
100,000.0	dyne

Pressure & Stress Unit Conversion:

Units: psi, ksi, psf, Pa, kPa, MPa, GPa

1 Pa =
0.0001450377	psi (lbf/in²)
145.0377E-9	ksi (1000 psi)
0.02088543	psf (lbf/ft²)
1.000000	Pa (Pascal)
0.001000000	kPa (kilopascal)
1.000000E-6	MPa (megapascal)
1.000000E-9	GPa (gigapascal

Fluid Pressure Unit Conversion:

Units: atm, bar, psi, psf, Pa, kPa, in Hg, mm Hg, cm Hg, in H2O, mm H2O, cm H2O

1 atm =
14.69595	psi (lbf/in²)
2,116.217	psf (lbf/ft²)
101,325.0	Pa (Pascal)
101.3250	kPa (kilopascal)
1.000000	atm (atmosphere)
1.013250	bar
29.92125	in Hg (inches of mercury)
759.9998	mm Hg (millimeters of mercury)
75.99998	cm Hg (centimeters of mercury)
406.7825	in H2O (inches of water)
10,332.27	mm H2O (millimeters of water)
1,033.227	cm H2O (centimeters of water)

Speed Unit Conversion:

Units: m/s, ft/s, ft/min, mph, km/s, knot, mach

1 m/s =
3.280840	ft/s (feet/second)
196.8504	ft/min (feet/minute)
2.236936	mph (miles/hour)
1.0000000	m/s (meters/second)
0.001000000	km/s (kilometers/second)
1.943844	knot (nautical miles per hour)
0.002915452	mach (speed of sound in air @ 68°F)

Acceleration Unit Conversion:

Units: m/s², g, in/s², ft/s²

1 g =
1.000000	g (gravitational acceleration)
386.0886	in/s² (inches/second²)
32.17405	ft/s² (feet/second²)
9.806650	m/s² (meters/second²)

Angular Velocity Unit Conversion:

Units: rad/s, rpm, deg/s, Hz

1 rpm =
0.1047198	rad/s (radians/second)
6.000000	deg/s (degrees/second)
0.01666667	Hz (cycles/second)
1.000000	rpm (revolutions/minute) (cycles/minute)

Energy & Work Unit Conversion:

Units: J, kJ, Whr, kWhr, cal, kcal, inlbf, ftlbf, BTU, eV

1 W*hr =
31,862.68	in*lbf (inch-pound)
2,655.224	ft*lbf (foot-pound)
3.412142	BTU (British thermal unit)
3,600.000	J (Joule) (N-m)
3.600000	kJ (kilojoule) (kN-m)
1.0000000	W*hr (Watt-hour)
0.001000000	kW*hr (kilowatt-hour)
859.8452	cal (calorie)
0.8598452	kcal (kilocalorie)
22.46943E21	eV (electron volt)

Power Unit Conversion:

Units: W, kW, hp, ftlbf/s, ftlbf/min, BTU/s, BTU/min, BTU/hr

1 W =
0.7375621	ft*lbf/s (foot-pound/second)
44.25373	ft*lbf/min (foot-pound/minute)
0.001341022	hp (horsepower)
0.0009478171	BTU/s (BTU/second)
0.05686903	BTU/min (BTU/minute)
3.412142	BTU/hr (BTU/hour)
1.000000	W (Watt)
0.001000000	kW (kilowatt)

Volumetric Flow Rate Unit Conversion:

Units: m³/s, L/s, in³/s, ft³/s, ft³/min, gpm

1 L/s =
61.02374	in³/s (inch³/second)
0.03531467	ft³/s (foot³/second)
2.118880	ft³/min (foot³/minute)
15.85032	gpm (gallon/minute)
0.001000000	m³/s (meter³/second)
1.0000000	L/s (liter/second)

Density Unit Conversion:

Units: g/cm³, kg/m³, lbm/in³, lbm/ft³, slug/in³, slug/ft³

1 kg/m3 =
36.12729E-6	lbm/in³
0.06242796	lbm/ft³
1.122871E-6	slug/in³
0.001940320	slug/ft³
0.001000000	g/cm³
1.000000	kg/m³

Moment & Torque Unit Conversion:

Units: Nm, kgfm, dynecm, inlbf, ft*lbf

1 N*m =
8.850746	in*lbf (inch-pound)
0.7375621	ft*lbf (foot-pound)
1.0000000	N*m (Newton-meter)
0.1019716	kgf*m (kilogram-force-meter)
10.000000E6	dyne*cm (dyne-centimeter)

Temperature Unit Conversion:

Units: °C, °F, K, °R

1 degF =
1.000000	°F (degrees Fahrenheit)
-17.22222	°C (degrees Celsius)
460.6700	°R (degrees Rankine)
255.9278	K (Kelvin)

With this all-encompassing unit conversion calculator, engineers can easily convert measurements across various units and quantities, eliminating the need for manual calculations and saving valuable time. The aesthetic design and user-friendly interface enhance the overall experience, making it an indispensable tool for professionals in the engineering field.

Boost your productivity and efficiency with the All-in-One Engineering Unit conversion Calculator. Simplify complex conversions and focus on what truly matters – engineering excellence.